low polymer
英 [ləʊ ˈpɒlɪmə(r)]
美 [loʊ ˈpɑːlɪmər]
网络 低聚合物
双语例句
- Besides, the low molecule polymer polyethylene glycol ( PEG600) provides some lubrication and collapse prevention in drilling fluid, and it inhibits the gas-hydrate formation effectively.
低分子量的聚乙二醇具有一定的润滑性和防塌性，同时对天然气水合物有较好的抑制性； - Furthermore, procyanidins low polymer and procyanidins high polymer were separated by organic reagent extraction.
并用有机溶剂萃取法初步分离出低聚原花青素和高聚原花青素。 - In addition to melt viscosity with low viscosity polymer or outside, water spray ( water ring) granulator suitable for most polymers.
除熔体粘度低或具有粘性的聚合物之外，喷水（水环）造粒机适用于大多数聚合物。 - The results showed that, with the increment of iron content, B and aging time, the species of PAFC changed form low polymer to high polymer.
实验结果表明，随着铁含量的增加、碱化度（B）的增大和熟化时间的延长，PAFC中铝铁的形态由低聚物向高聚物转化。 - The diaphragm is made of a low mass polymer, carefully formed to broaden resonant modes to reduce their amplitude.
横膈膜是低质量的聚合物，仔细形成扩大谐振模式，以减少他们的振幅。 - The composition analysis of procyanidins low polymer by HPLC showed that the compositions of the extracted product were the almost same as the compositions of standard procyanidins.
通过HPLC对原花青素低聚物进行了成分分析，结果表明，所提取的产品与原花青素标准品成分基本一致。 - Low polymer fracturing fluid system, with characteristics of little residue, low friction and filtrate loss, being easy to flow back, is developed.
研制开发了低残渣、低摩阻、低滤失和易返排的低聚合物压裂液体系。 - The article analyzed the production process of slurry polyethylene ( PE) and discussed the cause for forming low molecular polymer and its impact on the performance of the PE product. Measures were presented aimed at eliminating the existing problems in the production.
对淤浆法聚乙烯（PE）的生产过程进行了分析，探讨了低聚物产生的原因和进入产品后对PE性能的影响，论述了降低产品中低聚物含量和消除低聚物对产品性能影响的方法。 - With the Zinc as the catalyst, lactide monomer was obtained by decomposition of low polymer. With the zinc diethyl as the catalyst, the lactide was polymerized to Poly ( DL-lactic acid).
以锌为催化剂由乳酸的低聚物裂解制得单体丙交醋，再由二乙基锌引发开环聚合得到高分子量的聚乳酸。 - The study on compound modified method with ground fine mineral powder and emulsion powder to the performance of polymer cement mortar with low polymer cement ratio is carried out.
：采用磨细矿粉与乳胶粉复合改性的方法对低聚灰比聚合物水泥砂浆的性能进行了研究。 - Plasticizer DOTP was prepared from ethylene glycol residue ( major component is PET low polymer) using single step process in which alcoholysis and ester interchange were combined.
以聚酯生产中产生的下脚料&乙二醇残渣（主要含PET低聚物）为原料，采用辛醇合并醇解、酯交换一步法工艺，合成了增塑剂DOTP。 - Study on low lacticacid polymer as controlled urea release membrane
用低聚乳酸作尿素缓释膜的研究 - This technique can realize deep profile adjustment and water flooding recovery factor enhancement by plugging the high permeability layers with the floc units generated from the bridging and adsorption of the formation low density polymer residue on the flocculant.
该技术是利用地层残留低浓度聚合物对絮凝剂的桥接吸附作用形成絮凝体封堵高渗透层，达到深部调剖、提高水驱采收率的目的。 - Hydrogen Isotopes Low Permeation Polymer Materials
氢同位素低渗透率高分子材料 - Study on slurry PE low molecular polymer
淤浆法聚乙烯低聚物的研究 - The experimental results indicated that low temperature of casting solution and coagulation bath, short evaporation time and low polymer concentration of casting solution tend to increase the effective porosity of membrane.
实验结果表明较低的铸膜液温度和凝胶浴温度、较短的蒸发时间和较低聚合物浓度有利于增加膜的有效孔隙率。 - Starch is a natural low cost polymer which can be modified with many agents, and the resulted products and itself can be biodegraded completely.
淀粉来源广，价格低廉，产物可完全生物降解，因此淀粉改性絮凝剂的研究发展迅速。 - The Regression Relationship Between Drilling Speed and the Nozzle Viscosity of Low Solids Polymer Mud
聚合物低固相泥浆水眼粘度与钻速的回归关系 - Rapid Synthesis of Powder Acrylic Acid Low Polymer
粉状丙烯酸低聚物的快速合成和应用 - The results showed that the different alloys have a great effect on blending system, and the low molecular weight, low crystalline polymer and high processing temperature can improve the compatibility of polymer.
实验结果表明：不同的合金对体系的影响很大，低分子量、低结晶性聚合物，高的成型加工温度可提高材料的相容性。 - Self-assembly Synthesis and the Application of Low Dimension Polymer Nano-materials
低维聚合物纳米材料的自组装制备、性能及应用 - The paper expatiates the lab research, evaluating and applying situation in the field about a series of low polymer fracturing fluid adapted in reconstructive low press and low leap store layer.
阐述了适用于低压低渗储层改造的低聚合物压裂液体系的室内研究、评价及现场实施情况。 - Effects on exciton confinement and energy transfer in nano-line of low dimension polymer
低维聚合物纳米线中的激子限域和能量传递效应研究 - The results indicate that water and metal ions can promote the development of fly ash from vitreous body to low polymer in the process of wet milling and placement, so as to improve the second-hydration capability of mineral admixture slurry.
研究表明，在湿磨及放置过程中，粉煤灰玻璃体表面可向低聚度方向转化，结构变疏松，可促进其二次水化反应。 - The new generation of low polymer cement ratio and high elasticity polymer cement waterproof paint is developed by means of modified treatment of polymer and special composition of plastifier to be added.
通过对聚合物进行改性处理，加入特殊成分的增塑剂，研制成新一代低聚灰比高弹性聚合物水泥防水涂料的性能，并对其固化机理进行了初步探讨。 - It has the characteristics of low polymer and crosslinker concentration, inexpensive charge and controllable gelling time, so it is suitable for large volume treatment to improve the volumetric sweep efficiency of water, modify the water profile and enhance the recovery ratio.
因此，它比较适合大剂量注入，有望进行深部处理，提高注入水的体积波及系数，改善吸水剖面，从而达到提高采收率的目的。 - The effects of shear rate and shear time on gelling behavior of weak gel formed with the solution of low polymer concentration are studied in this paper. Some results were gained.
用实验方法研究了剪切速率和剪切时间对2种成胶体系的低浓度聚合物冻胶成胶行为的影响。 - Multilayer coextrusion blow molding ( shortened as MCBM) is is an advanced polymer molding technique by which high performance, low cost polymer multilayer composite container and goods are produced and the future important problems of engineering material will be resolved.
聚合物多层共挤吹塑成型技术是制造多层复合高性能聚合物容器制品的一种先进成型技术，最有希望解决未来重大工程材料问题。 - Weak gel is composed with low concentration polymer and crosslinking agent, in which the intermolecular crosslinking is mostly.
可动凝胶是由低浓度的聚合物和交联剂形成的以分子间交联为主的弱交联体系。